mtkernel_3/device/ser/ser_cnf.h | bare source | permlink (0.00 seconds) |
1: /* 2: *---------------------------------------------------------------------- 3: * Device Driver for micro T-Kernel for μT-Kernel 3.00.05 4: * 5: * Copyright (C) 2020-2021 by Ken Sakamura. 6: * This software is distributed under the T-License 2.2. 7: *---------------------------------------------------------------------- 8: * 9: * Released by TRON Forum(http://www.tron.org) at 2021/11. 10: * 11: *---------------------------------------------------------------------- 12: */ 13: 14: 15: /* 16: * ser_cnf.h 17: * Serial communication device driver 18: * Device configuration file 19: */ 20: #ifndef __DEV_SER_CNF_H__ 21: #define __DEV_SER_CNF_H__ 22: 23: #define DEVCNF_SER_DEVNAME "ser" // Device name ("ser") 24: 25: #define DEVCONF_SER_BUFFSIZE 50 // Communication data buffer size 26: 27: /* Default value for attribute data */ 28: #define DEVCNF_SER_SPEED 115200 // Communication speed (baud rate) 29: #define DEVCNF_SER_MODE (DEV_SER_MODE_CTSEN | DEV_SER_MODE_RTSEN | \ 30: DEV_SER_MODE_8BIT | DEV_SER_MODE_1STOP | DEV_SER_MODE_PNON) 31: // Mode: Hard flow control enable, 32: // data 8bit, stop 1bit, no parity 33: #define DEVCNF_SER_SND_TMO TMO_FEVR // Send timeout 34: #define DEVCNF_SER_RCV_TMO TMO_FEVR // Receive timeout 35: 36: /*---------------------------------------------------------------------- 37: * Hardware dependent definition 38: */ 39: #ifdef CPU_TMPM367FDFG 40: #include "sysdepend/tx03_m367/ser_cnf_m367.h" 41: #endif /* CPU_TMPM367FDFG */ 42: #ifdef CPU_RX231 43: #include "sysdepend/rx231/ser_cnf_rx231.h" 44: #endif /* CPU_RX231 */ 45: #ifdef CPU_STM32L4 46: #include "sysdepend/stm32l4/ser_cnf_stm32l4.h" 47: #endif /* CPU_STM32L4 */ 48: #ifdef CPU_RZA2M 49: #include "sysdepend/rza2m/ser_cnf_rza2m.h" 50: #endif /* CPU_RZA2M */ 51: 52: 53: #endif /* __DEV_SER_CNF_H__ */