| tkernel_2/kernel/sysdepend/device/tef_em1d/tkdev_conf.h | bare source | permlink (0.02 seconds) |
1: /* 2: *---------------------------------------------------------------------- 3: * T-Kernel 2.0 Software Package 4: * 5: * Copyright 2011 by Ken Sakamura. 6: * This software is distributed under the latest version of T-License 2.x. 7: *---------------------------------------------------------------------- 8: * 9: * Released by T-Engine Forum(http://www.t-engine.org/) at 2011/05/17. 10: * Modified by TRON Forum(http://www.tron.org/) at 2015/06/01. 11: * 12: *---------------------------------------------------------------------- 13: */ 14: 15: /* 16: * tkdev_conf.h (EM1-D512) 17: * Target System Configuration 18: */ 19: 20: #ifndef _TKDEV_CONF_ 21: #define _TKDEV_CONF_ 22: /* Also included from assembler source */ 23: 24: /* 25: * Timer 26: * register size W 27: */ 28: #define TI(n) ( 0xc0000000 + (n) ) /* TI0 */ 29: 30: #define TI_OP TI(0x00) /* RW timer operation */ 31: #define TI_CLR TI(0x04) /* -W clear timer */ 32: #define TI_SET TI(0x08) /* RW set timer value */ 33: #define TI_RCR TI(0x0c) /* R- current counter */ 34: #define TI_SCLR TI(0x14) /* RW watch out for setting timer value */ 35: 36: #define TO_EN 0x0004 /* enable TOUT */ 37: #define TSTART 0x0002 /* start counting */ 38: #define TM_EN 0x0001 /* enable timer */ 39: 40: #define TCR_CLR 0x0002 /* clear counter */ 41: 42: #define TM_SCLR 0x0001 /* watch out for setting timer value */ 43: 44: /* 45: * Supply clock 46: * register size W 47: */ 48: #define ASMU(n) ( 0xc0110000 + (n) ) 49: 50: #define TI0TIN_SEL ASMU(0x0138) /* set TI0/TW0 TIN */ 51: #define DIVTIMTIN ASMU(0x014c) /* set timer clock divisor */ 52: #define GCLKCTRL3 ASMU(0x01cc) /* set clock gate */ 53: #define GCLKCTRL3ENA ASMU(0x01d0) /* enable write */ 54: 55: #define TITIN_PLL3 0 /* PLL3 divided by DIVTIMTIN */ 56: #define TITIN_32768 1 /* 32.768 KHz */ 57: #define TITIN_32K 2 /* 32 KHz */ 58: 59: #define TI0_TIN_GCK 0x00000001 /* TI0 TIN gate */ 60: 61: /* 62: * Input clock 63: * PLL3 divided by DIVTIMTIN 64: */ 65: #define PLL3_CLK 229376000 /* Hz */ 66: 67: #define D0(d) ( (d) & 0x7 ) /* DIV0TIMTIN */ 68: #define D1(d) ( ((d) >> 4) & 0xf ) /* DIV1TIMTIN */ 69: 70: #define TIN_CLK(d) ( PLL3_CLK / ((1 << D0(d)) * (D1(d) + 1)) ) 71: 72: /* 73: * TI0 timer interrupt 74: */ 75: #define IRQ_TIMER 54 /* IRQ number */ 76: #define VECNO_TIMER ( EIT_IRQ(IRQ_TIMER) ) /* interrupt vector number */ 77: 78: #define IRQM(irq) ( 1 << ((irq) % 32) ) /* IRQ bit mask */ 79: 80: /* 81: * Interrupt controller 82: * register size W 83: */ 84: #define AINT(n) ( 0xc0020000 + (n) ) /* ACPU Interrupt */ 85: #define SINT(n) ( 0xcc010000 + (n) ) /* ACPU Secure Interrupt */ 86: 87: #define IT0_IEN0 AINT(0x0000) /* RW ACPU interrupt enable 0 */ 88: #define IT0_IEN1 AINT(0x0004) /* RW ACPU interrupt enable 1 */ 89: #define IT0_IEN2 AINT(0x0100) /* RW ACPU interrupt enable 2 */ 90: #define IT0_IDS0 AINT(0x0008) /* -W ACPU interrupt disable 0 */ 91: #define IT0_IDS1 AINT(0x000C) /* -W ACPU interrupt disable 1 */ 92: #define IT0_IDS2 AINT(0x0104) /* -W ACPU interrupt disable 2 */ 93: #define IT0_RAW0 AINT(0x0010) /* R- ACPU interrupt Raw status 0 */ 94: #define IT0_RAW1 AINT(0x0014) /* R- ACPU interrupt Raw status 1 */ 95: #define IT0_RAW2 AINT(0x0108) /* R- ACPU interrupt Raw status 2 */ 96: #define IT0_MST0 AINT(0x0018) /* R- ACPU interrupt mask / status 0 */ 97: #define IT0_MST1 AINT(0x001C) /* R- ACPU interrupt mask / status 1 */ 98: #define IT0_MST2 AINT(0x010C) /* R- ACPU interrupt mask / status 2 */ 99: #define IT0_IIR AINT(0x0024) /* -W ACPU interrupt status / reset */ 100: #define IT0_FIE AINT(0x0080) /* RW ACPU FIQ enable interrupt */ 101: #define IT0_FID AINT(0x0084) /* -W ACPU FIQ disable interrupt */ 102: #define IT_PINV_SET0 AINT(0x0300) /* RW enable inverted logic for interrupt input 0 */ 103: #define IT_PINV_SET1 AINT(0x0304) /* RW enable inverted logic for interrupt input 1 */ 104: #define IT_PINV_SET2 AINT(0x0308) /* RW enable inverted logic for interrupt input 2 */ 105: #define IT_PINV_CLR0 AINT(0x0310) /* -W disable inverted logic for interrupt input 0 */ 106: #define IT_PINV_CLR1 AINT(0x0314) /* -W disable inverted logic for interrupt input 1 */ 107: #define IT_PINV_CLR2 AINT(0x0318) /* -W disable inverted logic for interrupt input 2 */ 108: #define IT_LIIS AINT(0x0320) /* -W internal interrupt status / set */ 109: #define IT_LIIR AINT(0x0324) /* -W internal interrupt status / reset */ 110: 111: #define IT0_IENS0 SINT(0xE200) /* RW ACPU Secure enable interrupt 0 */ 112: #define IT0_IENS1 SINT(0xE204) /* RW ACPU Secure enable interrupt 1 */ 113: #define IT0_IENS2 SINT(0xE208) /* RW ACPU Secure enable interrupt 2 */ 114: #define IT0_IDSS0 SINT(0xE20C) /* -W ACPU Secure disable interrupt 0 */ 115: #define IT0_IDSS1 SINT(0xE210) /* -W ACPU Secure disable interrupt 1 */ 116: #define IT0_IDSS2 SINT(0xE214) /* -W ACPU Secure disable interrupt 2 */ 117: 118: /* 119: * GIO interrupt 120: * register size W 121: */ 122: #define GIO(b, n) ( (b) + (n) ) /* General I/O */ 123: #define _L ( 0xc0050000 + 0x000 ) 124: #define _H ( 0xc0050000 + 0x040 ) 125: #define _HH ( 0xc0050000 + 0x080 ) 126: #define _HHH ( 0xc0050000 + 0x200 ) 127: 128: #define GIO_IIA(b) GIO(b,0x0014) /* RW enable interrupt ??? */ 129: #define GIO_IEN(b) GIO(b,0x0018) /* -W enable interrupt */ 130: #define GIO_IDS(b) GIO(b,0x001C) /* -W disable interrupt */ 131: #define GIO_IIM(b) GIO(b,0x001C) /* R- enable interrupt ??? */ 132: #define GIO_RAW(b) GIO(b,0x0020) /* R- interrupt Raw status */ 133: #define GIO_MST(b) GIO(b,0x0024) /* R- interrupt mask / status */ 134: #define GIO_IIR(b) GIO(b,0x0028) /* -W reset the cause of interrupt */ 135: #define GIO_GSW(b) GIO(b,0x003C) /* RW connected to GIO_INT_FIQ pin */ 136: #define GIO_IDT(n,b) GIO(b,0x0100+(n)*4) /* RW interrupt detection method 0-3 */ 137: #define GIO_RAWBL(b) GIO(b,0x0110) /* R- edge-triggered interrupt status L */ 138: #define GIO_RAWBH(b) GIO(b,0x0114) /* R- edge-triggered interrupt status H */ 139: #define GIO_IRBL(b) GIO(b,0x0118) /* -W clear the cause of edge-triggered interrupt L */ 140: #define GIO_IRBH(b) GIO(b,0x011C) /* -W clear the cause of edge-tirggered interrupt H */ 141: 142: /* 143: * Timer interrupt level 144: * No meaning since EM1-D512 does not have a mechanism of prioritized interrupt. 145: */ 146: #define TIMER_INTLEVEL 0 147: 148: #endif /* _TKDEV_CONF_ */